Automotive Paint Booth (High-Class Paint Booth)
Request a Quote
Kalux-O
Motor and Fan (Makeup Air Units)
- Motor type: motor mounted inside the fan housing
- Qty: 1 pc
- Single motor power: 7.5 kW
- Total power: 7.5 kW
- Fan type: double-intake centrifugal fan (YDW-5.6M)
- Total air capacity: 20,000 m³/h
Motor and Fan (Exhaust Air Units)
- Motor type: motor mounted inside the fan housing
- Qty: 1 pc
- Single motor power: 7.5 kW
- Total power: 7.5 kW
- Fan type: double-intake centrifugal fan (YDW-5.6M)
- Total air capacity: 20,000 m³/h
Exhaust Air Filtration
- Fiberglass filter: G3 grade (EN779), type PA-50
- Granular active carbon (KC-8.0) in “M-shape” filter frame
Kalux-B
Motor and Fan (Makeup Air Units)
- Motor type: belt drive
- Qty: 2 pcs
- Single motor power: 4 kW
- Total power: 8 kW
- Fan type: double-intake centrifugal fan (TAE-400-H)
- Total air capacity: 25,000 m³/h
Motor and Fan (Exhaust Air Units)
- Motor type: belt drive
- Qty: 1 pc
- Single motor power: 7.5 kW
- Total power: 7.5 kW
- Fan type: double-intake centrifugal fan (TAE-560-H)
- Total air capacity: 25,000 m³/h
Exhaust Air Filtration
- Fiberglass filter: G3 grade (EN779), type PA-50
- Granular active carbon in “column-shape” filter frame
Kalux-T
Motor and Fan (Makeup Air Units)
- Motor type: direct drive
- Qty: 1 pc
- Single motor power: 7.5 kW
- Total power: 7.5 kW
- Fan type: single-intake turbo fan
- Total air capacity: 25,000 m³/h
Motor and Fan (Exhaust Air Units)
- Motor type: direct drive
- Qty: 1 pc
- Single motor power: 7.5 kW
- Total power: 7.5 kW
- Fan type: single-intake turbo fan
- Total air capacity: 25,000 m³/h’
Exhaust Air Filtration
- Active carbon filter in “pocket-shape”, F5 grade (EN779), type C16-200
Main Configuration
| Base Structure | |
| Floor Arrangement |
|
| Cover Plate | Bent galvanized-steel cover plate, 300 mm high |
| Supporting Frame | Galvanized square-tube steel frame, 40 × 80 mm (W × L) |
| Floor Filter | Fiberglass filter installed on filter frame, G3 grade (EN779), filtering area 26.91 m² |
| Booth Body | |
| Entrance Door | 4-leaf door, size 3,200 × 2,600 mm (W × H), bent-steel structure without exposed edge, tempered-glass windows, color-steel frame |
| Personnel Door | 1 pc, size 700 × 2,000 mm (W × H), tempered-glass window, square color-steel frame |
| Wall Panel | 50 mm thick, 1,000 mm wide, EPS insulation, covered with 0.426 mm color-steel sheet. Tongue-and-groove interlock panel, both sides color-steel |
| Roof Panel | Made of 0.6 mm bent galvanized-steel plate |
| Ceiling Light | 10 fixtures on left and right upper position. PHILIPS LED 22 W per fixture. Total 40 tubes |
| Side Light | 10 fixtures on left and right wall panel. PHILIPS LED 22 W per fixture. Total 40 tubes |
| Plenum | 450 mm high, made of bent galvanized-steel panels, powder-coated |
| Ceiling Filter | Aluminum profile support net with F5 ceiling filter (EN779), type SP-600G |
| Makeup Air Units | |
| Cabinet Frame | 1.5 mm bent galvanized steel, aluminum-alloy three-way connector |
| Makeup Air Control | Belimo NMU230 10N actuator or manual damper (depending on model) for fresh-air control |
| Pneumatic Actuator | Controls air-valve opening/closing during spraying or baking |
| Heating System |
|
| Makeup Air Filter | Pre-filter, G3 grade (EN779) |
| Exhaust Air Units | |
| Cabinet Frame | 1.5 mm bent galvanized steel, aluminum-alloy three-way connector |
| Exhaust Air Control | Belimo NMU230 10N actuator for air-valve opening/closing. Equipped with 4 m straight duct, 1 pc 90° elbow duct, and 1 pc 30° elbow duct |
| Control System | Includes: pressure gauge, temperature controller, baking timer, hour counter, spray switch, heat-spray switch, bake switch, left light switch, right light switch, start switch, power switch, emergency stop |
Cases