Automatic Seam Welder, Direct Current (DC) Inverter Type Manufacturer

Automatic Seam Welder, Direct Current (DC) Inverter Type

: http://solution-welding.com

The automatic seam welder (direct current (DC) inverter type) carries out automatic welding, making it suitable for large-scale production operations for manufacturing things like solar water heaters, sink fuel tanks, pipelines, gas tanks, machine enclosures, and so on.

Features

Two welding drive rolls with silver bearing helps to achieve consistent electrical conductivity and reduced friction to increase its production efficiency.
Corrections on bevel gears ensure the good leak tightness of welding parts. Breakdown or puncture of welding components can be prevented and wear-resistant welding wheel can maintain high-speed welding.
A resistance welding control system can help you adjust current frequency, pulse duration, current magnitude.
The T1 pure copper welding transformer has minimized no-load loss, strong output power, good insulating property for long service life.
High Si content electrical steel sheet, resin vacuum casting, water-cooled secondary connection cable
A two-way temperature regulating valve serves as an integral overload relief valve to prevent against transformer damage because of high temperature.

Parameter

Model		FN-100	FN-125	FN-160	FN-200	FN-250
Item	Unit	FN-100	FN-125	FN-160	FN-200	FN-250
Rated voltage	V	380
Rated frequency	HZ	50/60
Rated capacity	KVA	100	125	160	200	250
Rated duty cycle	%	20
Insulation class		B
Maximum secondary short circuit current	A	18000	19500	22000	27500	29800
Maximum welding power	KVA	120	150	200	250	300
Maximum pressure	N	6100	6100	10000	10000	12000
Maximum welding ability	low-carbon steel mm	1.0+1.0	1.2+1.2	1.5+1.5	2+2	2.5+2.5
Input air pressure	Mpa	0.5
Cooling water flow	L/min	20	20	20	20	20
Control mode		numerical control
Stroke	MM	0-80
Welding speed	M/min	0.6-3.0